And it was all yellow

Posted: February 18, 2012 in Tutorial
Tags: , , , ,

A few people were interested in how I went about painting the yellow armour plates on my Bad Moon ork so I took some step-by-step pictures. Essentially I just followed an ‘Eavy Metal guide on painting Bad Moon orks. Here are my thought on the painting process.

Step 1


First of all I basecoated the yellow areas with Tausept Ochre. Although GW’s advertising claims that Foundation Paints can cover any primer in one coat I find it much better to apply several thinned coats for a smoother finish. This stage is just to provide a solid base over which a much brighter, more vibrant yellow can be painted.

Step 2


I then painted over the basecoat with a 50/50 mix of Iyanden Darksun and Golden Yellow again using several thin layers. At this point the yellow isn’t much to look at.

Step 3


The armour was then shaded with Dark Flesh to give it a deep, rich orange tone.

Step 4


I then reapplied the mix from step 2 and highlighted it by adding Skull White. I didn’t take pictures of both of these stages as I was painting quite quickly in order to prevent the paint from drying out ( I hate it when a paint mix dried during painting and you have to try and replicate it). The photo above shows the armour after the final highlight stage.

This was quite an easy guide to follow and, I’m pleased to say, my version ended up very similar to the example in the book. This is a good way to paint quite a difficult colour.

You can see the finished model here.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s